Видео

Being a solvent, Zep does no damage to the paint?

Cheap can’t control settings and bad splatter hard to be consistent with. Good for beginner

Zep is great

does it cut as well as your zero turn?

Nice vid, I also have the same welder and when testing the output, the welder was way low. At 90 shown on unit, it output 72, at 120 amps output on unit, the actual was 98. Maybe I have a dud but it welds great, you just need to dial in a higher than normal setting. Thx for the vid.

Tienen repuestos en Chillán

Someone already told u about changing to perimeter back to charger. I think you should clean it more often, it’s so small, takes 10mins to clean and flip the blades, using all 4 sides of the blade. I found some blades for a fraction of the cost on Alibaba and the screws fit although I haven’t had to use them yet. Also I zip tied a Ring Camera to the onboard camera cos the Ring is connected to all cameras around the house, so when on is triggered they all record that moment. Plus the Ring Camera has an alarm “added security” I totally understand TIME VS MONEY but these mowers are extremely overpriced. These things can only be bought by ppl who really need them. Outside of the developed world no one can afford them and only an extremely low percentage of ppl can afford them in the developed world, so I guess they want to profit only of a few ppl… 2 tiny motors, a gps and a motherboard for 3K with extremely limited service and have to BEG my brother or neighbors to go save my robot while I’m at work. Finally, mine struggles to find the charging station for some reason after the unnecessary updates, just goes round in circles then shuts off… Great video and summary of your experience, thx 👊🏾🇳🇬🇺🇸

I did this exact same with a tig, ran 103 over 35 and just let it slip right down the steel pole. Had no vertical horsies with this welder I just put it on the march setting and it did the job! Has anyone else used this machine to do track welds?

Very good video and I really appreciate the real feedback. Thank you for that. Luba 2 does have a few problems it seems. I read somewhere else that warranty is not very good with them. In case of issues you have to ship it back to Canada on your own expense? Is that true? That alone puts me off regarding the purchase of this machine.

Can you use this products in a car plastic bumper?

I know you have 1000 hours, is that for this year alone?

Thanks for the very informative video. I tried Penetrol and didn’t like the streaks it left. Also it took forever to cure, not a fan, removed it and now thinking about giving the ZEP a try. How did it do overtime, weather, rain? Thinking of ZEP for the fact that it seems to be the easiest to apply and shouldn’t leave any marks.

Iv paid more money on less that’s for sure. I think I’m going to do this to my old dodge

I love how I just stumbled on the 1st video and now this one, I’m lucky haha

I have worked on a Husky 440 with a messed up brake. I am an old school logger. I just took the dam thing off. And have used it for a long time. When I started cutting, for years the older saws didn't have a brake. I am not saying to use it without A brake unless you are sure you know what you're doing.

I've had mine for about 5 years, don't remember exactly why I picked this one, but I was pleasantly surprised how well it has held up. I have had sticking problems forever but that's my choice of rods, I didn't know which ones to buy. I do wish I had gotten a combo unit though. Was just on Deko's website and their combo choices are very slim.

Great video! I'm about to tackle my 8n as well. Hopefully with a little less of an environmental impact lol!

Excellent video, love the detail and the production value. Sounds like mammotion has many improvements to make for Luba 3. The hardware seems pretty robust overall, aside from a few tweaks. Some of the software/firmware issues are pretty unacceptable however. You may want to check out the Sunseeker X7 if you decide to buy a new mower, it's pretty similar to the Luba.

What grit was your wet sanding done with? Probably going to hit the hood and roof of my truck that’s really sunfaded

Do you have to use a SIM card, and if so, what's that price ?? Does the RTF unit have to stay powered once you set it up, if its unpowered do you need to reprogram the mowing area ?

Are you sure its the battery? My husqvarna had an identical problem. Turned out it was the main circuit board losing comms. Easy fix. Problem solved

Did you ever get the boat done/finished and ready for fishing?

Freaking awesome review. You made it real and successfully convinced me this vice will do what I need it to do. Thank you for putting this together and sharing.

My father-in-law let me use his 40 vote and I think it's trash Get 2 cuts out of the chainsaw before the battery is dead then I have to wait an hour for it to charge These chainsaws are only good for twigs And I'm only cutting 8" inch Thick logs

My trailer isn't a dually now what

Thanks for the video

If you could get the genetics into vegetables them are the most indestructible seeds on the planet the can lay for years and still germinate amazing plants been keeping them out for years and just found a path on my place infested they weren't there last year not there for 5 years amazing

Excellent video Justin! Can't wait to see more follow-up videos on the Luba. We're in a similar position as you - we have around 2.5 main acres around the house we'd like cut, but still have an additional 2 or so acres we'd like the luba to handle as well. Definitely a huge bummer that the acreage limit is capped where it is. We've an 850ft driveway flanked with grass on either side (2ish acres) that we're hoping Luba will be able to tackle, IF it can reach and IF we end up going with Luba. Grateful for videos like yours. 👌🏻

😂

Good Review. Thanks

My experiences with the Luba 2 is that the robot is pretty awesome, but the app is clunky and has issues. I've also had some issues with my Luba not working as it should (not charging reliably, not resuming jobs after charging during a job), and trying to get tech support for it has been one of the most frustrating experiences of my life. I do believe they are working on both of these things, so hopefully they will continue to improve, but for now your experiences may vary greatly depending upon who you manage to get in contact with. After finally getting some help I'm hopeful that I can get my Luba working as it should but still not sure.

With the wonderful condition it's really in for it's age, DO NOT TEAR IT DOWN !!!!! Spend some $$, and elbow grease, and clean it up, and fix it up good enough to use. You don't have to do an outrageously expensive complete remodel of it, just fix up the areas that need a bit of TLC, because these Vintage Class C Coaches are getting harder and harder to come by these days, and if you do find one in decent shape that runs, you're gonna need to shell out some serious cash just to make the purchase. Turning it into a Flatbed would cost you more $$ than it would to fix it up and leave it as is. You can find Flatbed Trucks a dime a dozen in that era, but you cannot find Class C Motorhomes as easily that are in the remarkable condition that yours is in. I myself stumbled upon a 1987 Ford E350 30 Foot Fleetwood Jamboree Class C Motorhome that will run if need be, but I chose to turn mine into a permanently parked Tiny Home. And I only paid $750 for it, and drove it from where I purchased it to where it currently sits.

Very nice to see a garaged S1 rx8, sir. Still have it in the original engine? •following now

Yanmar designs John Deere subcompact and yanmar engines are in a lot of tractors

Very useful vidéo, many thanks from France

How did the zep lay out?

That's a spring from an overfilled aquifer

It's abluegill

I was just thinking, You didn't spray the dirt away from the plugs with engine cleaner before you pulled them. And then it happened.... bad monkey.

Someone's pond is draining into your yard!

"Mystery hole." #phrasing

Are those baby sunfish? This is so weird. I’d be a little worried about erosion.

could you save the fish? or did you actually eat them?

A pond or a stream is leaking.

Underground spring near a pond

There aren't fish in the ground, are you crazy? (This guy)......"hold my beer".

"I'm gonna be rich" this man severely overestimated the market for small fish

Whats the nearest open water source those fish are found? I think you may about to have a shore front view of that source.

That’s the spawn point set up an xp farm

What the hell man 🤣🤣🤣